avatar  


Recently viewed tickets

Log out

SETUP ANDROID DEVICES FOR COM WIRELESS

SETUP ANDROID DEVICES FOR COM WIRELESS
These instructions apply to Android devices. You will use a setup wizard called Cloudpath XpressConnect to connect your device. You may also use these instructions to recreate your connection in the future. This may be necessary if you delete your connection or change your password. Please note that the "CollegeofMarin" wireless is for onboarding purpose ONLY. You must complete your setup join to your assigned wireless network. The following are the known Android setup requirements:
  • Android 2.1 or greater is necessary to run the configuration application;
  • You must use the default Android browser. Always select this as your browser during setup;
  • You will need to set up a lock screen or swipe pattern if you do not already have one. You may also turn it back to previous state after the install.
Step 1: Enable wireless on your device Verify that Wi-Fi is enabled.
If your Wi-Fi is already enabled, go to Step 2. If disabled, follow instructions below.
Go to Settings > Wi-Fi, the Wi-Fi option must be ON.

Step 2: Select CollegeofMarin Within your Wi-Fi settings, select CollegeofMarin from your list of available networks.
The wireless login page will open automatically. This may take few seconds.
If that does not work, open a browser.
You should be directed to the wireless login page. If you are not redirected automatically, go to https://byod.marin.edu
The illustrations below show only Student configuration. Staff (Classified, Faculty, & Management) and Guest configurations are similar. Select your appropriate network access: you may be either Guest, Student, or Staff.


Step 3: Terms and ConditionsOn the wireless login page:
Read carefully the Terms & Conditions of using COM wireless
Check I accept the terms of the End-User License Agreement, if you agreed.
Click Start.
Click OK at the notification prompt.



Step 4: Login credentials For the username, enter your MyCOM username (not your email address).
Enter your MyCOM password in the password field. Only passwords are case-sensitive.
Click Continue.


Step 5: Download CloudPath application Download the application file from any of the sources below.
The below instructions relate to the "Local download".



Start download
Click "OK" to accept the warning about the potentially harmful file (Cloudpath.apk).
http://it.marin.edu/sites/it/files/Screenshot_20160929-105538.jpg
Click "OPEN" to begin install



Launch the "Cloudpath.apk" to install

Step 6: Unblocked the installation If the download process is blocked, follow the instructions in this step modify your security settings. Otherwise, go to Step 7.







Step 7: Begin installation If the download



Step 8: Continue with device configurationGo back to the byod.marin.edu browser:
If your Android version is 5.1.1 (Lollipop) or below, click on Step 2



If your Android version is 6.0 (Marshmallow) or above, click the "alternate option" link in the fine print below Step2.



If prompted to connect using "existing credentials" or "new credentials", please press "Generate new credentials."

Click continue to configure your wireless client




Step 9: Continue with device configuration Go to Settings > Wi-Fi
Confirm that your device is connected to the appropriate wireless network (not "CollegeofMarin").



If your Android version is 6.0 (Marshmallow) or above, the "alternate option" link in the fine print below Step2.
Creation date: 2/17/2018 6:37 PM ()      Updated: 12/10/2020 2:51 PM (JGudmundsson)
Files   
AllowInstallation.jpg
56.3 KB resend
Andr_cred_option.png
143.8 KB resend
Android_cloudpath_2.jpg
38.8 KB resend
AppInstalled.jpg
8.7 KB resend
Byod.jpg
54.1 KB resend
BYODDownload.jpg
57.6 KB resend
BYODinstall.jpg
53 KB resend
BYODlogin.jpg
35.4 KB resend
BYODok.jpg
63.3 KB resend
BYODopen.jpg
61.7 KB resend
BYODstart.jpg
41.8 KB resend
DataImage16.png
70 b resend
DataImage16.png
77 b resend
DataImage97.png
57.5 KB resend
Done.jpg
43.8 KB resend
Final Connect with network.jpg
20.6 KB resend
Install blocked.jpg
27.3 KB resend
Install.jpg
27.3 KB resend
Step2Configure.jpg
53.3 KB resend
UnknownSources.jpg
51.6 KB resend