avatar  


Recently viewed tickets

Log out

SETUP IPHONES/IPAD FOR COM WIRELESS

SETUP IPHONES/IPAD FOR COM WIRELESS
If you are renewing your Wifi certificate, you will need to clear out expired Wifi certificate. Click here for instructions.
These instructions apply to Apple iOS Devices (iPhone, iPad, iPod). You will use a setup wizard called Cloudpath XpressConnect to connect your device. You may also use these instructions to recreate your connection in the future. This may be necessary if you delete your connection or change your password. Please note that the "Com-Limited wireless is for onboarding purpose ONLY. You must complete your setup to join your assigned wireless network.


Step 1: Enable wireless on your device Verify that Wi-Fi is enabled.
If your Wi-Fi is already enabled, go to Step 2. If disabled, follow instructions below.
Go to Settings > Wi-Fi, the Wi-Fi option must be ON.



Step 2: Select COM-Limited   Within your Wi-Fi settings, select Com-Limited from your list of available networks.

The wireless login page will open automatically. This may take few seconds.
If that does not work, open the Safari browser (other internet browsers may not work).
You should be directed to the wireless login page. If you are not redirected automatically, go to https://byod.marin.edu
The illustrations below show only Student configuration. Staff (Classified, Faculty, & Management) and Guest configurations are similar. Select your appropriate network access: you may be either Guest, Student, or Staff.




Step 3: Terms and Conditions    On the wireless login page:
Read carefully the Terms & Conditions of using COM wireless
Check I accept the terms of the End-User License Agreement, if you agreed.
Click Start.
Click OK at the notification prompt.




Step 4: Login credentials   For the username, enter your MyCOM username (not your email address).
Enter your MyCOM password in the password field. Only passwords are case-sensitive.
Click Continue.



Step 5: Download configuration  profile    
You may be presented with a warning, while your device is trying to download the configuration profile. Please allow the process to continue.


 
Step 6: Select your device
If you have Apple Watch or related devices, you will be prompted to select your device.  Please proceed to select your device.



 
Step 7: Profile downloaded 
You will be instructed to go to Settings for installing your downloaded profile


  

Step 8: Install profile
Please go to Settings and click on "Profile Downloaded" to continue the process.



Install Profile:



You may have to enter your passcode, if any.




Warning of Installing the Certificate:



Confirm the install by clicking Install at the next prompt.




If you have trouble installing the certificate, you may need to clear out any existing COM Wifi certificate. Click here for instructions.


Step 9: Complete install

Click Done



Step 10: Connect to the COM secure wireless

 A pop-up notification may open informing you that you still need to select a wireless network.
Tap OK.
 A message with instructions will open. Please read the instructions.
Go to Settings > Wi-Fi and select the appropriate wireless network.


Step 11: Confirm that you are connected




Open Safari and visit a web page to confirm that you are connected.


Creation date: 2/17/2018 7:00 PM ()      Updated: 1/26/2021 8:23 PM (WLee)
Files   
DataImage11.png
33.8 KB resend
DataImage17.jpg
33.5 KB resend
DataImage19.jpg
32 KB resend
DataImage38.jpg
84.9 KB resend
DataImage48.jpg
180.6 KB resend
DataImage55.jpg
35.7 KB resend
DataImage55.jpg
21.6 KB resend
DataImage64.png
81.8 KB resend
DataImage66.png
231.8 KB resend
DataImage70.jpg
141.4 KB resend
DataImage82.png
151.3 KB resend
DataImage83.jpg
16.9 KB resend
DataImage83.png
58.7 KB resend
DataImage96.jpg
31.7 KB resend
DataImage99.png
41.2 KB resend
DataImage99.png
28.2 KB resend
DataImage99.png
100.4 KB resend